ABB_Low_Voltage_图文

Catalog

Low voltage General performance motors

We provide motors and generators, services and expertise to save energy and improve customers’ processes over the total lifecycle of our products, and beyond.

2 LV General performance motors EN 02-2010 | ABB LV Motors

General performance motors Sizes 56 to 250, from 0.06 to 55 kW

ABB’s General performance motors are best suited for applications where simplicity and off-the-shelf availability are paramount. With ABB quality and support these motors have the features appreciated by volume customers and serial OEM’s. Motors have IE1 efficiency. Motor range for aluminum motors is 56 to 250, 0.06 to 55 kW and cast iron motors 71 to 250, 0.25 to 55 kW.

Ordering information Technical data – Aluminum – Cast iron Variant codes Dimension drawings – Aluminum – Cast iron General performance – Aluminum – Cast iron

04 05 08 10 12 13 motors in brief 14 16

ABB LV Motors | LV General performance motors EN 02-2010 3

Ordering information
When placing an order, please state the following minimum data in the order, as in the example. The product code of the motor is composed in accordance with the following example. Motor type Pole number Mounting arrangement (IM-code) Rated output Product code Variant codes if needed M2AA 112 M 4 IM B3 (IM 1001) 4 kW 3GAA 112 101-ADE

Motor size
A B C D, E, F

M2AA 112 M 3GAA 112 101 - ADE, 122, 451, etc.
1 2 3 A Motor type B Motor size C Product code 4 5 6 7 8 9 10 11 12 13 14... E Voltage and frequency code F Generation code followed by variant codes D Code for mounting arrangement

Explanation of the product code
Positions 1 to 4 3GAA = Totally enclosed motor with aluminum stator frame 3GBA = Totally enclosed motor with cast iron frame Position 4 Type of rotor A = Squirrel cage rotor Positions 5 and 6 IEC size 05 = 56 13 = 132 06 = 63 16 = 160 07 = 71 18 = 180 08 = 80 20 = 200 09 = 90 22 = 225 10 = 100 25 = 250 11 = 112 Position 7 Pole pairs 1 = 2 poles 2 = 4 poles 3 = 6 poles Positions 8 to 10 Running number Position 11 - (dash) Position 12 Mounting arrangement A = Foot-mounted motor B = Flange-mounted motor. Large flange with clearance holes. C = Flange-mounted motor. Small flange with tapped holes. F = Foot- and flange-mounted motor. Special flange. H = Foot- and flange-mounted motor. Large flange with clearance holes. J = Foot- and flange-mounted motor. Small flange with tapped holes. N = Flange-mounted (CI ring flange FF) P = Foot-and flange-mounted motor (CI ring flange FF) Position 13 Voltage and frequency Single-speed motors B 380 VΔ 50 Hz D 400 VΔ, 415 VΔ, 690 VY 50 Hz E 500 VΔ 50 Hz F 500 VY 50 Hz S 230 VΔ, 400 VY, 415 VY 50 Hz *) T 660 VΔ 50 Hz U 690 VΔ 50 Hz X Other rated voltage, connection or frequency, 690 V maximum Position 14 Version A,B,C... = Generation code followed by variant codes *) M2AA 200 is not available for voltages less than 380 VD

4 LV General performance motors EN 02-2010 | ABB LV Motors

General performance aluminum motors Technical data for totally enclosed squirrel cage three phase motors
IP 55 - IC 411 - Insulation class F, temperature rise class B IE1 efficiency class according to IEC 60034-30; 2008
Efficiency IEC 60034-2-1; 2007 Output kW Motor type 3000 r/min = 2-poles 0.09 0.12 0.18 0.25 0.37 0.55 0.75 1.1 1.5 2.2 3 4 5.5 7.5 11 15 18.5 22 30 37 45 55 11 15 18.5 M2AA 56 A M2AA 56 B M2AA 63 A M2AA 63 B M2AA 71 A M2AA 71 B M2AA 80 A M2AA 80 B M2AA 90 S M2AA 90 L M2AA 100 L M2AA 112 M M2AA 132 SA M2AA 132 SB M2AA 160 MLA M2AA 160 MLB M2AA 160 MLC M2AA 180 MLA M2AA 200 MLA M2AA 200 MLB M2AA 225 SMA M2AA 250 SMA M2AA 132 SMA M2AA 132 SMC M2AA 132 SMD 3GAA 051 001-??A 3GAA 051 002-??A 3GAA 061 001-??C 3GAA 061 002-??C 3GAA 071 001-??E 3GAA 071 002-??E 3GAA 081 001-??E 3GAA 081 002-??E 3GAA 091 001-??E 3GAA 091 002-??E 3GAA 101 001-??E 3GAA 111 101-??E 3GAA 131 001-??E 3GAA 131 002-??E 3GAA 161 041-??G 3GAA 161 042-??G 3GAA 161 043-??G 3GAA 181 041-??G 3GAA 201 041-??G 3GAA 201 042-??G 3GAA 221 041-??G 3GAA 251 041-??G 3GAA 131 005-??E 3GAA 131 006-??E 3GAA 131 007-??E Speed r/min 2820 2840 2820 2810 2800 2790 2820 2760 2895 2890 2905 2885 2845 2860 2921 2929 2935 2928 2948 2949 2948 2964 2890 2905 2870 Full 3/4 load load 100% 75% 59.8 67.2 75.0 78.6 71.6 78.4 78.8 78.1 78.5 83.6 85.4 85.7 85.8 87.0 88.2 89.3 89.8 90.4 91.1 91.6 92.1 92.4 89.0 89.9 89.3 53.3 63.8 72.0 77.0 72.3 79.8 79.6 80.0 77.2 84.4 85.8 86.7 86.4 88.0 89.0 90.2 90.1 90.6 91.1 92.0 92.3 92.4 90.4 90.2 90.5 1/2 load 50% 47.9 55.6 66.1 69.6 70.2 78.7 77.9 79.7 71.6 83.0 84.4 86.5 86.0 86.0 88.1 89.3 89.4 89.6 89.8 91.6 91.8 91.5 90.6 89.3 90.7 Current Power factor I N cos j A 0.69 0.64 0.62 0.69 0.76 0.78 0.79 0.83 0.75 0.82 0.81 0.85 0.87 0.89 0.89 0.90 0.91 0.90 0.88 0.92 0.91 0.91 0.87 0.87 0.88 0.31 0.4 0.55 0.66 0.98 1.29 1.73 2.4 3.6 4.6 6.2 7.9 10.6 13.9 20.2 26.9 32.6 39 54 63.3 77.4 94.4 20.5 27.6 33.9 Is IN 3.9 4.1 4.2 4.5 5.1 5.3 5.1 5.7 6.4 7.2 7.5 7.4 6.8 7.2 6.3 7.1 7.2 7.1 7.7 7.7 7.7 7.3 7.5 9.1 8.2 Torque TN Nm 0.3 0.4 0.6 0.8 1.3 1.9 2.5 3.8 4.9 7.2 9.8 13.2 18.4 25.0 35.9 48.9 60.1 71.7 97.1 119 145 177 36.3 49.3 61.5 Tl TN 2.9 3.2 3.5 3.6 3.0 2.9 3.4 2.5 2.3 2.7 2.6 2.6 2.8 3.0 1.7 2.2 2.2 2.8 2.8 2.5 2.7

IE1

Product code

Tb TN 2.7 2.8 3.1 3.3 2.9 2.8 3.0 2.6 3.0 2.8 3.2 2.8 3.2 3.4 2.7 3.1 3.2 3.1 3.6 3.4 2.9

Moment Sound of inertia pressure 2 J = 1/4 GD Weight level LPA 2 kgm kg dB 0.00011 0.00012 0.00013 0.00016 0.00035 0.00045 0.00069 0.0009 0.0019 0.0024 0.0041 0.0061 0.014 0.016 0.038 0.048 0.054 0.059 0.093 0.118 0.198 0.281 0.0165 0.02 0.02356 3.2 3.4 3.9 4.4 4.9 5.9 8.5 10.5 13 16 21 26 38 43 82 96 104 118 160 185 236 295 63 81 89 48 48 54 54 58 58 60 60 63 63 65 67 75 73 73 73 73 75 75 75 75 75 69 69 68

400 V 50 Hz

CENELEC-design

2.3 2.3 2.5 3.3 2.9 3.1 4.0 3.5

3000 r/min = 2-poles

400 V 50 Hz

High-output design

The two bullets in the product code indicate choice of mounting arrangements, voltage and frequency code (see ordering information page).

I s / IN = Starting current T l / TN = Locked rotor torque Tb / TN = Breakdown torque

Efficiency values are given according to IEC 60034-2-1; 2007. Please note that the values are not comparable without knowing the testing method. ABB has calculated the efficiency values according to indirect method, stray load losses (additional losses) determined from measuring.

ABB LV Motors | LV General performance motors EN 02-2010 5

General performance aluminum motors Technical data for totally enclosed squirrel cage three phase motors
IP 55 - IC 411 - Insulation class F, temperature rise class B IE1 efficiency class according to IEC 60034-30; 2008
Efficiency IEC 60034-2-1; 2007 Output kW Motor type 1500 r/min = 4-poles 0.06 0.09 0.12 0.18 0.25 0.37 0.55 0.75 1.1 1.5 2.2 3 4 5.5 7.5 11 15 18.5 22 30 37 45 55 11 15 M2AA 56 A M2AA 56 B M2AA 63 A M2AA 63 B M2AA 71 A M2AA 71 B M2AA 80 A M2AA 80 B M2AA 90 S M2AA 90 L M2AA 100 LA M2AA 100 LB M2AA 112 M M2AA 132 S M2AA 132 M M2AA 160 MLA M2AA 160 MLB M2AA 180 MLA M2AA 180 MLB M2AA 200 MLA M2AA 225 SMA M2AA 225 SMB M2AA 250 SMA M2AA 132 SMA M2AA 132 SMC 3GAA 052 001-??A 3GAA 052 002-??A 3GAA 062 001-??C 3GAA 062 002-??C 3GAA 072 001-??E 3GAA 072 002-??E 3GAA 082 001-??E 3GAA 082 002-??E 3GAA 092 001-??E 3GAA 092 002-??E 3GAA 102 001-??E 3GAA 102 002-??E 3GAA 112 101-??E 3GAA 132 001-??E 3GAA 132 002-??E 3GAA 162 041-??G 3GAA 162 042-??G 3GAA 182 041-??G 3GAA 182 042-??G 3GAA 202 041-??G 3GAA 222 041-??G 3GAA 222 042-??G 3GAA 252 041-??G 3GAA 132 005-??E 3GAA 132 006-??E Speed r/min 1340 1370 1400 1380 1365 1355 1375 1400 1420 1420 1430 1430 1430 1450 1450 1459 1462 1465 1463 1475 1477 1478 1478 1460 1455 Full 3/4 load load 100% 75% 51.1 55.5 65.5 67.3 65.1 69.7 74.1 75.5 77.2 81.3 82.3 84.6 86.0 86.5 88.6 88.2 89.2 89.8 90.4 91.1 91.6 92.1 92.4 88.6 89.2 45.8 50.2 60.4 63.9 66.0 71.9 75.9 77.0 78.1 81.9 83.4 85.7 87.1 87.0 89.2 89.0 89.8 90.3 90.9 91.5 91.9 92.4 92.7 89.1 89.7 1/2 load 50% 36.0 40.5 51.7 56.7 62.7 71.1 75.0 75.7 76.0 80.1 82.5 84.2 86.8 86.1 88.4 88.4 89.2 89.8 90.5 91.0 91.4 91.9 92.2 88.1 89.3 Current Power factor I N cos j A 0.67 0.62 0.57 0.62 0.76 0.79 0.78 0.76 0.77 0.75 0.78 0.78 0.80 0.75 0.75 0.81 0.82 0.82 0.83 0.83 0.84 0.84 0.85 0.78 0.78 0.25 0.37 0.46 0.62 0.72 0.96 1.37 1.88 2.6 3.5 4.9 6.5 8.3 12.2 16.2 22.2 29.6 36.2 42.3 57.2 69.4 83.9 101 22.9 31.1 Is IN 2.5 2.8 3.1 3.1 4.0 3.8 4.5 4.5 4.8 5.8 5.6 6.4 6.4 5.6 6.1 6.5 7.1 7.7 7.7 7.3 6.9 7.4 7.4 7.0 7.2 Torque TN Nm 0.4 0.6 0.8 1.2 1.7 2.6 3.8 5.1 7.3 10.0 14.6 20.0 26.7 36.2 49.3 71.9 97.9 120 143 194 239 290 355 71.9 98.4 Tl TN 2.2 2.9 2.7 2.5 2.0 2.0 1.9 1.9 2.0 2.8 2.2 2.5 2.3 2.1 2.3 2.3 2.6 2.6 2.9 2.4 2.3 2.7 2.1 2.4

IE1

Product code

Tb TN 2.2 2.9 2.8 2.6 2.1 2.2 2.2 2.4 2.6 3.0 2.6 3.0 2.6 2.6 2.7 2.6 3.3 3.1 3.5 3.0 2.7 2.7 2.9 3.3

Moment Sound of inertia pressure 2 J = 1/4 GD Weight level LPA 2 kgm kg dB 0.00017 0.00018 0.00019 0.00026 0.00066 0.0008 0.0013 0.0019 0.0032 0.0043 0.0069 0.0082 0.01 0.031 0.038 0.068 0.085 0.103 0.122 0.22 0.317 0.374 0.485 0.0381 0.0485 3.2 3.4 4 4.5 5.2 5.9 8.5 10 13 16 21 24 29 42 49 84 98 116 131 187 231 257 297 76 88 36 36 40 40 45 45 50 50 50 50 64 66 60 66 66 65 65 65 65 67 68 68 68 69 69

400 V 50 Hz

CENELEC-design

2.4 3.0

1500 r/min = 4-poles

400 V 50 Hz

High-output design

The two bullets in the product code indicate choice of mounting arrangements, voltage and frequency code (see ordering information page).

I s / IN = Starting current T l / TN = Locked rotor torque Tb / TN = Breakdown torque

Efficiency values are given according to IEC 60034-2-1; 2007. Please note that the values are not comparable without knowing the testing method. ABB has calculated the efficiency values according to indirect method, stray load losses (additional losses) determined from measuring.

6 LV General performance motors EN 02-2010 | ABB LV Motors

General performance aluminum motors Technical data for totally enclosed squirrel cage three phase motors
IP 55 - IC 411 - Insulation class F, temperature rise class B IE1 efficiency class according to IEC 60034-30; 2008
Efficiency IEC 60034-2-1; 2007 Output kW Motor type 1000 r/min = 6-poles 0.09 0.12 0.18 0.25 0.37 0.55 0.75 1.1 1.5 2.2 3 4 5.5 7.5 11 15 18.5 22 30 37 7.5
1)

IE1

Current Power factor I N cos j A 0.56 0.58 0.73 0.71 0.73 0.69 0.64 0.63 0.69 0.66 0.68 0.65 0.71 0.77 0.77 0.75 0.77 0.76 0.83 0.82 0.73 0.49 0.51 0.58 0.79 1.04 1.59 2.3 3.4 3.9 5.8 7.7 10.6 13.3 16.4 23.7 32.7 38.9 46.7 57.5 71.4 17.5 Is IN 2.1 2.1 3.1 3.3 3.6 3.3 3.6 3.2 4.2 5.1 4.3 5.1 5.3 6.4 7.7 7.7 5.9 5.4 7.0 6.7 4.9

Torque TN Nm 0.9 1.3 1.9 2.6 3.8 5.8 7.7 11.4 15.0 21.8 29.8 39.5 54.7 73.9 108 147 181 216 290 358 75.3 Tl TN 2.1 2.1 1.9 2.2 1.6 1.8 2.1 1.9 2.0 2.3 1.8 2.1 2.0 1.8 2.1 2.3 1.9 1.8 2.4 2.3 1.7 Tb TN 2.1 2.1 2.0 2.2 2.0 1.9 2.4 2.1 2.3 2.8 2.3 2.5 2.4 3.0 3.2 3.8 2.5 2.3 2.8 2.7 2.1

Product code 3GAA 063 001-??C 3GAA 063 002-??C 3GAA 073 001-??E 3GAA 073 002-??E 3GAA 083 001-??E 3GAA 083 002-??E 3GAA 093 001-??E 3GAA 093 002-??E 3GAA 103 001-??E 3GAA 113 101-??E 3GAA 133 001-??E 3GAA 133 002-??E 3GAA 133 003-??E 3GAA 163 041-??G 3GAA 163 042-??G 3GAA 183 041-??G 3GAA 203 041-??G 3GAA 203 042-??G 3GAA 223 041-??G 3GAA 253 041-??G 3GAA 133 006-E

Speed r/min 910 910 895 895 910 905 925 915 950 960 960 965 960 968 968 968 975 969 985 985 950

Full 3/4 load load 100% 75% 47.1 57.5 60.4 64.0 69.9 72.1 71.5 72.9 79.6 82.8 82.5 83.6 83.8 85.4 87.0 88.1 89.1 89.3 90.6 91.2 84.7 42.5 54.0 60.0 63.6 71.4 73.4 70.9 73.4 79.9 82.5 82.9 83.2 84.3 86.3 87.7 88.6 90.0 90.5 91.0 91.6 86.1

1/2 load 50% 32.1 46.2 55.0 59.5 68.8 71.2 65.9 70.0 77.5 79.5 80.9 80.8 82.9 85.8 87.0 87.7 89.9 90.7 90.4 91.0 86.3

Moment Sound of inertia pressure 2 J = 1/4 GD Weight level LPA 2 kgm kg dB 0.0002 0.00027 0.00092 0.0012 0.002 0.0026 0.0032 0.0043 0.0082 0.01 0.031 0.038 0.045 0.071 0.102 0.139 0.218 0.218 0.547 0.728 0.0485 4 4.5 5.5 6.5 9 10 13 16 23 28 39 46 54 84 110 137 186 198 257 291 88 38 38 42 42 47 47 44 44 49 54 57 61 57 61 61 61 65 65 65 65 69

400 V 50 Hz

CENELEC-design

M2AA 63 A M2AA 63 B M2AA 71 A M2AA 71 B M2AA 80 A M2AA 80 B M2AA 90 S M2AA 90 L M2AA 100 L M2AA 112 M M2AA 132 S M2AA 132 MA M2AA 132 MB M2AA 160 MLA M2AA 160 MLB M2AA 180 MLA M2AA 200 MLA
1)

M2AA 200 MLB M2AA 225 SMA M2AA 250 SMA M2AA 132 SMA

1000 r/min = 6-poles
Temperature rise class F

400 V 50 Hz

High-output design I s / IN = Starting current T l / TN = Locked rotor torque Tb / TN = Breakdown torque

The two bullets in the product code indicate choice of mounting arrangements, voltage and frequency code (see ordering information page).

Efficiency values are given according to IEC 60034-2-1; 2007. Please note that the values are not comparable without knowing the testing method. ABB has calculated the efficiency values according to indirect method, stray load losses (additional losses) determined from measuring.

ABB LV Motors | LV General performance motors EN 02-2010 7

General performance cast iron motors Technical data for totally enclosed squirrel cage three phase motors
IP 55 - IC 411 - Insulation class F, temperature rise class B IE1 efficiency class according to IEC 60034-30; 2008
Efficiency IEC 60034-2-1; 2007 Output kW Motor type 3000 r/min = 2-poles 0.37 0.55 0.75 1.1 1.5 2.2 3 4 5.5 7.5 11 15 18.5 22 30 37 45 55 0.25 0.37 0.55 0.75 1.1 1.5 2.2 3 4 5.5 7.5 11 15 18.5 22 30 37 45 55 M2BA 71 A M2BA 71 B M2BA 80 A M2BA 80 B M2BA 90 S M2BA 90 L M2BA 100 L M2BA 112 M M2BA 132 SA M2BA 132 SB M2BA 160 MLA M2BA 160 MLB M2BA 160 MLC M2BA 180 MLA M2BA 200 MLA M2BA 200 MLB M2BA 225 SMA M2BA 250 SMA M2BA 71 A M2BA 71 B M2BA 80 A M2BA 80 B M2BA 90 S M2BA 90 L M2BA 100 LA M2BA 100 LB M2BA 112 M M2BA 132 S M2BA 132 M M2BA 160 MLA M2BA 160 MLB M2BA 180 MLA M2BA 180 MLB M2BA 200 MLA M2BA 225 SMA M2BA 225 SMB M2BA 250 SMA 3GBA 071 101-??B 3GBA 071 102-??B 3GBA 081 101-??B 3GBA 081 102-??B 3GBA 091 101-??B 3GBA 091 102-??B 3GBA 101 101-??B 3GBA 111 101-??B 3GBA 131 101-??B 3GBA 131 102-??B 3GBA 161 041-??G 3GBA 161 042-??G 3GBA 161 043-??G 3GBA 181 041-??G 3GBA 201 041-??G 3GBA 201 042-??G 3GBA 221 041-??G 3GBA 251 041-??G 3GBA 072 101-??B 3GBA 072 102-??B 3GBA 082 101-??B 3GBA 082 102-??B 3GBA 092 101-??B 3GBA 092 102-??B 3GBA 102 101-??B 3GBA 102 102-??B 3GBA 112 101-??B 3GBA 132 101-??B 3GBA 132 102-??B 3GBA 162 041-??G 3GBA 162 042-??G 3GBA 182 041-??G 3GBA 182 042-??G 3GBA 202 041-??G 3GBA 222 041-??G 3GBA 222 042-??G 3GBA 252 041-??G Speed r/min 2705 2680 2820 2805 2890 2875 2910 2880 2885 2890 2921 2929 2935 2928 2948 2949 2948 2964 1365 1380 1415 1410 1410 1410 1425 1430 1420 1460 1445 1459 1462 1465 1463 1475 1477 1478 1478 Full 3/4 load load 100% 75% 69.2 73.2 78.1 79.5 82.2 83.4 83.2 84.9 85.4 86.5 88.2 89.3 89.8 90.4 91.1 91.6 92.1 92.4 68.3 72.4 74.5 77.0 78.4 80.4 83.2 83.2 83.8 87.8 86.7 88.2 89.2 89.8 90.4 91.1 91.6 92.1 92.4 73.5 77.3 79.1 81.2 82.5 84.5 83.4 86.2 85.0 86.3 89.0 90.2 90.1 90.6 91.1 92.0 92.3 92.4 70.8 74.5 73.8 77.0 79.6 81.4 84.3 84.1 85.2 87.8 88.0 89.0 89.8 90.3 90.9 91.5 91.9 92.4 92.7 1/2 load 50% 73.7 79.3 77.9 81.2 80.3 83.5 81.4 85.9 83.0 84.3 88.1 89.3 89.4 89.6 89.8 91.6 91.8 91.5 69.7 74.6 70.0 73.7 78.4 80.0 83.5 83.2 85.1 85.9 88.0 88.4 89.2 89.8 90.5 91.0 91.4 91.9 92.2 Current Power factor I N cos j A 0.80 0.85 0.81 0.82 0.81 0.84 0.83 0.89 0.82 0.81 0.89 0.90 0.91 0.90 0.88 0.92 0.91 0.91 0.81 0.83 0.73 0.72 0.79 0.78 0.80 0.80 0.82 0.76 0.80 0.81 0.82 0.82 0.83 0.83 0.84 0.84 0.85 0.96 1.27 1.71 2.4 3.2 4.5 6.2 7.6 11.3 15.4 20.2 26.9 32.6 39 54 63.3 77.4 94.4 0.65 0.88 1.45 1.95 2.5 3.4 4.7 6.5 8.4 11.8 15.6 22.2 29.6 36.2 42.3 57.2 69.4 83.9 101 Is IN 3.9 4.3 5.9 5.7 7.2 6.6 7.0 7.5 6.6 7.6 6.3 7.1 7.2 7.1 7.7 7.7 7.7 7.3 3.5 4.0 5.0 5.0 4.8 5.4 5.4 6.2 6.2 6.0 5.7 6.5 7.1 7.7 7.7 7.3 6.9 7.4 7.4 Torque TN Nm 1.3 1.95 2.5 3.7 4.9 7.3 9.8 13.2 18.2 24.7 35.9 48.9 60.1 71.7 97.1 119 145 177 1.74 2.5 3.7 5.0 7.4 10.1 14.7 20.0 26.8 35.9 49.5 71.9 97.9 120 143 194 239 290 355 Tl TN 2.2 2.4 2.3 2.7 2.5 2.3 2.7 2.4 2.3 2.7 1.7 2.2 2.2 2.8 2.8 2.5 2.7 2.3 1.9 1.6 2.0 1.9 1.9 2.5 2.1 2.2 2.2 1.8 1.9 2.3 2.6 2.6 2.9 2.4 2.3 2.4 2.7

IE1

Product code

Tb TN 2.3 2.7 2.8 3.0 2.4 3.2 2.6 3.5 2.7 3.1 3.2 3.1 3.6 3.4 2.9 2.3 2.0 2.1 2.8 2.6 2.3 3.2 2.8 2.8 2.7 2.7 2.4 2.6 3.3 3.1 3.5 3.0 2.7 3.0 2.7

Moment Sound of inertia pressure J = 1/4 GD 2 Weight level LPA kgm2 kg dB 0.00039 0.0008 0.00101 0.00199 0.00254 0.00445 0.00531 0.01275 0.038 0.048 0.054 0.059 0.093 0.118 0.198 0.281 0.00074 0.00088 0.00144 0.00198 0.0033 0.0044 0.00873 0.009 0.0106 0.02635 0.03282 0.068 0.085 0.103 0.122 0.22 0.317 0.374 0.485 11 11 14 16 22 24 32 37 61 68 118 132 140 167 213 239 296 338 10 11 15 16 22 25 34 35 39 60 70 120 134 115 165 240 292 317 341 58 56 60 60 63 63 65 67 75 73 73 73 73 75 75 75 75 75 45 45 45 50 50 50 64 67 60 66 66 65 65 65 65 67 68 68 68

400 V 50 Hz

CENELEC-design 2.49 0.00051

3.35 0.01029

1500 r/min = 4-poles

400 V 50 Hz

CENELEC-design

The two bullets in the product code indicate choice of mounting arrangements, voltage and frequency code (see ordering information page).

I s / IN = Starting current T l / TN = Locked rotor torque Tb / TN = Breakdown torque

Efficiency values are given according to IEC 60034-2-1; 2007. Please note that the values are not comparable without knowing the testing method. ABB has calculated the efficiency values according to indirect method, stray load losses (additional losses) determined from measuring.

8 LV General performance motors EN 02-2010 | ABB LV Motors

General performance cast iron motors Technical data for totally enclosed squirrel cage three phase motors
IP 55 - IC 411 - Insulation class F, temperature rise class B IE1 efficiency class according to IEC 60034-30; 2008
Efficiency IEC 60034-2-1; 2007 Output kW Motor type 1000 r/min = 6-poles 0.18 0.25 0.37 0.55 0.75 1.1 1.5 2.2 3 4 5.5 7.5 11 15 18.5 22 30 37
1)

IE1

Current Power factor I N cos j A 0.71 0.69 0.69 0.71 0.65 0.68 0.69 0.71 0.69 0.63 0.73 0.77 0.77 0.75 0.77 0.76 0.83 0.82 0.57 0.77 1.09 1.51 2.3 3.1 4.1 5.5 7.5 10.6 12.6 16.4 23.7 32.7 38.9 46.7 57.5 71.4 Is IN 3.1 3.4 3.6 3.8 3.6 3.8 4.0 5.1 7.0 5.6 4.6 6.4 7.7 7.7 5.9 5.4 7.0 6.7

Torque TN Nm 1.9 2.6 3.8 5.7 7.7 11.4 15.1 22.2 29.5 39.1 54.7 73.9 108 147 181 216 290 358 Tl TN 2.0 2.2 1.8 1.8 2.0 2.3 2.0 2.0 1.6 2.4 1.7 1.8 2.1 2.3 1.9 1.8 2.4 2.3 Tb TN 2.1 2.3 2.2 2.2 2.2 2.6 2.4 2.4 2.2 2.9 2.1 3.0 3.2 3.8 2.5 2.3 2.8 2.7

Product code 3GBA 073 101-??B 3GBA 073 102-??B 3GBA 083 101-??B 3GBA 083 102-??B 3GBA 093 101-??B 3GBA 093 102-??B 3GBA 103 101-??B 3GBA 113 101-??B 3GBA 133 101-??B 3GBA 133 102-??B 3GBA 133 103-??B 3GBA 163 041-??G 3GBA 163 042-??G 3GBA 183 041-??G 3GBA 203 041-??G 3GBA 203 042-??G 3GBA 223 041-??G 3GBA 253 041-??G

Speed r/min 900 895 915 920 925 915 945 945 970 975 960 968 968 968 975 969 985 985

Full 3/4 load load 100% 75% 63.7 67.2 71.0 73.9 70.0 73.3 76.0 81.2 83.5 85.7 86.3 85.4 87.0 88.1 89.1 89.3 90.6 91.2 63.8 67.2 71.1 75.0 68.9 73.5 77.6 82.2 83.8 84.6 87.3 86.3 87.7 88.6 90.0 90.5 91.0 91.6

1/2 load 50% 59.0 62.6 67.0 72.8 64.0 70.2 76.5 80.7 81.9 81.3 86.7 85.8 87.0 87.7 89.9 90.7 90.4 91.0

Moment Sound of inertia pressure 2 J = 1/4 GD Weight level LPA 2 kgm kg dB 0.00089 0.0011 0.00187 0.00239 0.0033 0.0044 0.00727 0.0114 0.03164 0.03336 0.0413 0.071 0.102 0.139 0.218 0.218 0.547 0.728 10 12 15 17 22 25 32 38 69 70 77 120 156 138 184 185 317 335 42 42 47 47 44 44 49 54 57 57 57 61 61 61 65 65 65 65

400 V 50 Hz

CENELEC-design

M2BA 71 A M2BA 71 B M2BA 80 A M2BA 80 B M2BA 90 S M2BA 90 L M2BA 100 LA M2BA 112 M M2BA 132 S M2BA 132 MA M2BA 132 MB M2BA 160 MLA M2BA 160 MLB M2BA 180 MLA M2BA 200 MLA
1)

M2BA 200 MLB M2BA 225 SMA M2BA 250 SMA

Temperature rise class F

The two bullets in the product code indicate choice of mounting arrangements, voltage and frequency code (see ordering information page).

I s / IN = Starting current T l / TN = Locked rotor torque Tb / TN = Breakdown torque

Efficiency values are given according to IEC 60034-2-1; 2007. Please note that the values are not comparable without knowing the testing method. ABB has calculated the efficiency values according to indirect method, stray load losses (additional losses) determined from measuring.

ABB LV Motors | LV General performance motors EN 02-2010 9

General performance motors – variant codes
The following variant codes area available, more information from ABB. M = modifciation, NA = not applicable, S = standard
Aluminum motors Code 1) Variant code Bearings and Lubrication 037 039 040 041 057 188 178 217 053 068 065 067 450 451 008 009 Roller bearing at D-end. Cold resistant grease. Heat resistant grease. Bearings regreasable via grease nipples. 2RS bearings at both ends. 63-series bearings. Stainless steel / acid proof bolts. Cast iron D-end shield Metal fan cover Light alloy metal fan Plugged existing drain holes. External earthing bolt. Heating element, 100-120V. Heating element, 200-240V. IM 2101 foot/flange mounted, IEC flange, from IM 1001 (B34 from B3). IM 2001 foot/flange mounted, IEC flange, from IM 1001 (B35 from B3). 047 048 066 IM 3601 flange mounted, IEC flange, from IM 3001 (B14 from B5). IM 3001 flange mounted, IEC flange, from IM 3601 M M M M M M M M M M M M M M M M M NA NA M M M M NA NA M NA NA NA NA NA NA NA NA S NA M M M M M M NA M M NA M NA M NA M M M M M M M M M M M NA M M M M M M M M M M M M M M M NA M S M M M M M M M M M M M M M NA M S M M M M M M M M M M M M M NA M M M M M M M M M M M M M NA NA NA NA M NA S S NA M M M M NA M NA M M NA NA NA M NA NA M M M M M M M M NA S S NA M M NA NA M M M M M NA M M2AA 56-250 56-63 71-80 90 100 112 132 160-250 Cast iron motors M2BA 71-250 71-132 160-250

Branch standard designs

Cooling system

Drain holes Earthing Bolt Heating elements

Mounting arrangements

(B5 from B14). Modified for non-standard mounting position (please specify M IM xxxx), (must be ordered for all mounting arrangements excluding IM B3 (1001), IM B5 (3001), IM B35 (2001), B34 (2101) & B14 (3601).

200 218 219 220 223 224 226 227 229 233 234 235 236 243 244 245 253 254 255 260

Flange ring holder Flange ring FT 85 Flange ring FT 100 Flange ring FF 100 Flange ring FF 115 Flange ring FT 115 Flange ring FF 130 Flange ring FT 130 Flange FT 130 Flange ring FF 165 Flange ring FT 165 Flange FF 165 Flange FT 165 Flange ring FF 215 Flange ring FT 215 Flange FF 215 Flange ring FF 265 Flange ring FT 265 Flange ring FT 265 Flange FT 115

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

M M M M M M M M NA M M NA NA NA NA NA NA NA NA M

M M M M M M M M NA M M M NA NA NA NA NA NA NA M

M NA NA NA NA M M M M M M NA NA M M M NA NA NA M

M NA NA NA NA M M M M M M NA NA M M M NA NA NA M

M NA NA NA NA NA NA NA NA NA NA NA M M M NA M M M M

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

10 LV General performance motors EN 02-2010 | ABB LV Motors

Aluminum motors Code 1) Variant code Painting 114 005 072 076 403 784 002 095 098 138 161 198 122 435 436 441 445 015 017 230 375 731 Testing 145 146 147 148 Type test report from a catalogue motor, 400V 50Hz. Type test with report for one motor from specific delivery batch Type test with report for one motor from specific delivery batch, customer witnessed. Routine test report. M M M M M M M M M M M NA NA M NA NA M NA NA M NA NA M NA NA M NA NA Special paint colour, standard grade. Metal protective roof, vertical motor, shaft down. Radial seal at D-end. Draining holes with plugs in open position. Degree of protection IP56. Gamma seal at D-end NA M NA NA M NA M M M NA M NA M M M M M S M M M NA NA M M M M NA M M M NA M M M M M M M S M M M NA NA M M M M NA M M M NA M M M M M M M S M M M NA NA M M M M NA M M M NA M M M M M M M S M M M NA NA M M M M NA M M M NA M M M M M M M M M M M NA NA M M M M NA NA M NA NA NA NA M M M NA NA NA M M S M M NA NA M NA NA M2AA 56-250 56-63 71-80 90 100 112 132 160-250

Cast iron motors M2BA 71-250 71-132 160-250 M M M NA M NA M M M M M NA M M M NA NA NA NA M NA NA M M M M M M NA S M NA M M S M M NA M M M M NA NA NA M NA NA M NA NA M

Protection

Rating & instruction plates Restamping voltage, frequency and output, continuous duty. M Restamping output (maintained voltage, frequency), intermittent duty. Stainless rating plate. Mounting of additional identification plate, aluminum. Additional rating plate delivered loose. Aluminum rating plate. M M M M S

Stator winding temperature sensors Bimetal detectors, break type (NCC), (3 in series), 150?C, in M stator winding. PTC - thermistors (3 in series), 130?C, in stator winding. PTC - thermistors (3 in series), 150?C, in stator winding. stator winding. Pt-100 2-wire in stator winding, 1 per phase Motor supplied in D connection. Motor supplied in Y connection. Standard metal cable glands. Standard plastic cable gland Two standard metal cable glands. M M

PTC - thermistors (3 in series, 130?C & 3 in series, 150?C), in NA NA NA NA NA NA M

Terminal box

ABB LV Motors | LV General performance motors EN 02-2010 11

General performance aluminum motors Dimension drawings
Foot-mounted motor IM1001, B3
M000524

M2AA 56 - 250

Flange-mounted motor IM 3001, B5

Sizes 56-200

Sizes 225-250

IM 1001, IM B3 and IM 3001, IM B5
Motor size 56 63 71 80 90 S 90 L 100 112 132 1) 132 160 180 200 225 250
2)

IM 1001, IM B3
L max poles 2 197 214 240 265.5 284,5 309.5 351 393 447 550 A 4-6 197 214 240 265.5 284,5 309.5 351 393 447 550 584 681 726 851 880
3)

IM 3001, IM B5
C 36 40 45 50 56 56 63 70 89 89 108 121 133 149 168 HD 159 171 180 217 217 237 249 321 370 390 425 525 572
4) 4)

D poles 2 4-6 9 11 14 19 24 24 28 28 38 38 42 48 55 55 60 9 11 14 19 24 24 28 28 38 38 42 48 55 60 65

GA poles 2 4-6

F poles 2 4-6 3 4 5 6 8 8 8 8 10 10 12 14 16 18 18

E poles 2 4-6 20 23 30 40 50 50 60 60 80 80 20 23 30 40 50 50 60 60 80 80

B 71 80 90 100 100 125 140 140 140 140 210 241 267 286 311

B’ 178 178 254 279 305 311 349

K 5,8 7 7 10 10 12 12 15 14.5 14.5 18.5 18 22

H 56 63 71 80 90 90 100 112 132 132 160 180 200 225 250

M 100 115 130 165 165 165 215 215 265 265 300 300 350 400 500

N 80 95 110 130 130 130 180 180 230 230 250 250 300 350 450

P 120 140 160 200 200 200 250 250 300 300 350 350 400 450 550

S 7 10 10 12 12 12 15 15 14.5 14.5 19 19 19 19 19

10,2 10,2 3 12,5 12,5 4 16 27 27 31 31 41 41 45 59 59 64 16 27 27 31 31 41 41 45 59 64 69 5 8 8 8 8 10 10 12 16 16 18 21.5 21.5 6

90 100 112 125 140 140 160 190 216 216 254 279 318 356 406

193.5 10

295.5 12

110 110 584 110 110 681 110 110 726 110 140 821 140 140 880

51.5 51.5 14

IM 3601, IM B14
Motor size 56 63 71 80 90 100 112 132 132
1) 2)

M 65 75 85

N 50 60 70

P 80 90

S M5 M5

Tolerances A,B D F H N C ±0,8 ISO k6 < ? 50 mm ISO m6 > ? 50 mm ISO h9 -0,5 ISO j6 ±0,8

1) 2) 3) 4)

M2AA 132 SA, SB, S, M, MA M2AA 132 SMA, SMC, SMD 160MLB 6-pole L=681 For voltage code S add 32 mm to listed HD-dimension

105 M6 120 M6 140 M8

100 80 115 95

130 110 160 M8 130 110 160 M8 165 130 200 M10 165 130 200 M10

Above table gives the main dimensions in mm. For detailed drawings please see our webpages ‘www.abb.com/motors&generators’ or contact ABB.
12 LV General performance motors EN 02-2010 | ABB LV Motors

General performance cast iron motors Dimension drawings
Foot-mounted motor IM1001, B3
M000418

M2BA 71 - 250

Flange-mounted motor IM 3001, B5

Sizes 71-200

Sizes 225-250

IM 1001, IM B3 and IM 3001, IM B5
Motor size 71 80 90S 90L 100 112 132S 132M 160 180 200 225 250 D poles 2 4-6 14 19 24 24 28 28 38 38 42 48 55 55 60 14 19 24 24 28 28 38 38 42 48 55 60 65 GA poles 2 4-6 16 27 27 31 31 41 41 45 59 59 64 16 27 27 31 31 41 41 45 59 64 69 F poles 2 4-6 5 8 8 8 8 10 10 12 16 16 18 5 6 8 8 8 8 10 10 12 14 16 18 18 E poles 2 4-6 30 40 50 50 60 60 80 80 30 40 50 50 60 60 80 80 L max poles 2 264 321 357 357 381 403 533 533 4-6 264 321 357 357 381 403 533 533 584 1) 681 726 851 879

IM 1001, IM B3
A 112 125 140 140 160 190 216 216 254 279 318 356 406 B 90 100 100 125 140 140 140 178 210 241 267 286 311 B’ 254 279 305 311 349 C 45 50 56 56 63 70 89 89 108 121 133 149 168 HD 178 195 219 219 247 259 300 300 413 433 473 539 584
2)

IM 3001, IM B5
K 7 10 10 10 12 12 12 12 14.5 14.5 18,5 18,5 24 H 71 80 90 90 100 112 132 132 160 180 200 225 250 M 130 165 165 165 215 215 265 265 300 300 350 400 500 N 110 130 130 130 180 180 230 230 250 250 300 350 450 P 160 200 200 200 250 250 300 300 350 350 400 450 550 S 10 12 12 12 15 15 15 15 19 19 19 19 19

21.5 21.5 6

110 110 584 110 110 681 110 110 726 110 140 821 140 140 879

51.5 51.5 14

IM 3601, IM B14
Motor size 71 80 90 100 112 132 M 85 N 70 P S Tolerances A,B D F H N C ±0,8 ISO k6 < ? 50 mm ISO m6 > ? 50 mm ISO h9 -0,5 ISO j6 ±0,8
1) 2)

105 M6 120 M6 140 M8

160MLB 6-pole L=681 200, voltage code S HD=478

100 80 115 95

130 110 160 M8 130 110 160 M8 165 130 200 M10

Above table gives the main dimensions in mm. For detailed drawings please see our webpages ‘www.abb.com/motors&generators’ or contact ABB.
ABB LV Motors | LV General performance motors EN 02-2010 13

General performance aluminum motors in brief
Motor size Stator Material Paint colour shade Surface treatment Feet Material Bearing end shields Material Paint colour shade Surface treatment Bearings Axially-locked bearings Bearing seals Lubrication Terminal box Material Surface treatment Screws Connections Knock-out openings Max Cu-area mm2 Terminal box Fan Fan cover Material Material Paint colour shade Stator winding Material Impregnation Stator winding temperature sensors Rotor winding Balancing method Key ways Heating elements Enclosure Cooling method Drain holes Lifting lugs
M2AA 132 SMA, SMC, SMD; 1) 6308-2Z/C3 2) 2*(M40+M32+M12) 3) 35

56

63

71

80

90

100

112

132

Diecast aluminum alloy. Munsell blue 8B 4.5/3.25 / NCS 4822 B05G Epoxy polyester powder paint, ≥ 30?m Fixed feet. Aluminum alloy Diecast aluminum alloy Munsell blue 8B 4.5/3.25 / NCS 4822 B05G Epoxy polyester powder paint, ≥ 30?m 6201-2Z/C3 6202-2Z/C3 6203-2Z/C3 6201-2Z/C3 6201-2Z/C3 6202-2Z/C3 D-end internal retaining ring Polyester powder paint, ≥ 30?m 6204-2Z/C3 6205-2Z/C3 6306-2Z/C3 6306-2Z/C3 6208-2Z/C3 1) 6203-2Z/C3 6204-2Z/C3 6205-2Z/C3 6205-2Z/C3 6206-2Z/C3 D-end inner bearing cover

D-end N-end

D-end

V-ring Permanently lubricated shielded bearings. Grease temperature range -40 to +160°C Diecast aluminum alloy, base integrated with stator. Similar to stator. Steel 5G, galvanised.

1 x M16 x Pg11 2.5 Cable lugs, 6 terminals

2 x (M20 + M20) 4

2 x (M20 + M25) 6

2)

10

3)

Screw terminal, 6 terminals

Cable lugs, 6 terminals

Polypropylene. Reinforced with 20% glass fibre. Polypropylene. Black Copper. Polyester varnish. Tropicalised.

Insulation class Insulation class F. Temperature rise class B, unless otherwise stated.

Optional. Material Diecast aluminum. Half key balancing. Closed keyway On request 8W IP 55. IC 411. Drain holes with closable plugs, open on delivery. Integrated with the stator 25 W

14 LV General performance motors EN 02-2010 | ABB LV Motors

General performance aluminum motors in brief
Size Stator M2AA Material Paint colour shade Surface treatment Feet Material Bearing end shields Material Paint colour shade Surface treatment Bearings Axially-locked Inner bearing cover Bearing seals Lubrication Terminal box Material Surface treatment Screws Connections Knock-out openings Flange-openings Max Cu-area mm2 Terminal box Screws Fan Fan cover Material Material Paint colour shade Surface treatment Stator winding Material Impregnation Insulation class Stator winding temperature sensors Rotor winding Balancing method Key ways Heating elements Enclosure Cooling method Drain holes Lifting lugs Optional Material (2 x M40 + M16) + (2 x M40) 35 6 terminals for connection with cable lugs (not included) M6 Polypropylene. Reinforced with 20% glass fibre. Hot dip galvanized steel Black, NCS 8801-B09G Polyester powder paint, ≥ 100?m Copper. Polyester varnish. Insulation class F. Temperature rise class B, unless otherwise stated. M10 D-end Axial seal Permanently lubricated shielded bearings. Wide temperature grease. Diecast aluminum alloy, base integrated with stator. Polyester powder paint, ≥ 100?m Steel 8.8, zinc electroplated and chromated 2 x FL13, 2 x M40 2 x FL 21, 2 x M63 (voltage code S) 70 Deep-drawn steel sheet, bolted to stator. Phosphated. Polyester paint. D-end N-end 160 180 200 225 250 Diecast aluminum alloy Munsell blue 8B 4.5/3.25 / NCS 4822 B05G Polyester powder paint, ≥ 100?m Bolt on feet, bolted to the stator. Aluminum alloy Cast iron Cast iron EN-GJL-200/GG 20/GRS 200 Munsell blue 8B 4.5/3.25 / NCS 4822 B05G Two-pack epoxy pain paint, ≥ 100?m 6209-2Z/C3 6209-2Z/C3 6210-2Z/C3 6209-2Z/C3 6212-2Z/C3 6209-2Z/C3 6213-2Z/C3 6210-2Z/C3 6215-2Z/C3 6212-2Z/C3 Extruded aluminum alloy.

Optional. Diecast aluminum. Half key balancing. Closed keyway 25 W IP 55. IC 411. Drain holes with closable plastic plugs, open on delivery. Integrated with the stator Bolted to the stator 50 W

ABB LV Motors | LV General performance motors EN 02-2010 15

General performance cast iron motors in brief
Motor size Stator Material Paint colour shade Surface treatment Feet Material Bearing end shields Material Paint colour shade Surface treatment Bearings Axially-locked bearings Bearing seals Lubrication Terminal box Material Surface treatment Screws Connections Threaded openings 2 x M16 2 x M25 2 x M32 D-end N-end Inner bearing cover D-end N-end 71 80 90 100 112 132 Cast iron EN-GJL-150/GG 15/GRS 150 Munsell blue 8B 4.5/3.25 / NCS 4822 B05G Two-pack epoxy paint, ≥ 60?m Fixed feet. Cast iron EN-GJL-150/GG 15/GRS 150 Cast iron EN-GJL-150/GG 15/GRS 150 Munsell blue 8B 4.5/3.25 / NCS 4822 B05G Two-pack epoxy paint, ≥ 60?m 6203-2Z/C3 6202-2Z/C3 D-end V-ring Labyrinth seal Permanently lubricated shielded bearings. Grease temperature range -40 to +160°C Cast iron EN-GJL-150/GG 15/GRS 150 Similar to stator. Steel 5G, coated with zinc and yellow chromated. 6204-2Z/C3 6203-2Z/C3 6205-2Z/C3 6204-2Z/C3 6206-2Z/C3 6205-2Z/C3 6206-2Z/C3 6205-2Z/C3 6208-2Z/C3 6208-2Z/C3

Max Cu-area mm2 Terminal box Fan Material Material Paint colour shade Fan cover Stator winding Surface treatment Material Impregnation Insulation class Stator winding temperature sensors Rotor winding Balancing method Key ways Heating elements Enclosure Cooling method Drain holes Lifting lugs On request Material

4

6

10

Cable lugs, 6 terminals Polypropylene. Reinforced with 20% glass fibre. Steel Black RAL 9011 Two-pack epoxy paint , ≥ 60?m Copper. Polyester varnish. Tropicalised. Insulation class F. Temperature rise class B, unless otherwise stated. Optional. Diecast aluminum. Half key balancing as stated Closed keyway 8W IP 55. IC 411. Drain holes with closable plugs, open on delivery. Integrated with the stator 25 W

16 LV General performance motors EN 02-2010 | ABB LV Motors

General performance cast iron motors in brief
Size Stator M2BA Material Paint colour shade Surface treatment Feet Material Bearing end shields Material Paint colour shade Surface treatment Bearings Axially-locked Bearing seals Lubrication Terminal box Material Surface treatment Screws Connections Threaded openings (2 x M40 + M16) D-end N-end Inner bearing cover D-end N-end Permanently lubricated shielded bearings. Cast iron, base integrated with stator. Two-pack epoxy pain paint, ≥ 100?m Steel 8.8, zinc electroplated and chromated Code S M50+M40+M16 (2 x M63 + M16) 160 180 200 225 250 Cast iron EN-GJL-200/GG 20/GRS 200 Munsell blue 8B 4.5/3.25 / NCS 4822 B05G Two-pack epoxy pain paint, ≥ 100?m Integrated with stator Cast-iron Cast iron EN-GJL-200/GG 20/GRS 200 Munsell blue 8B 4.5/3.25 / NCS 4822 B05G Two-pack epoxy pain paint, ≥ 100?m 6209-2Z/C3 6209-2Z/C3 D-end Axial seal 6210-2Z/C3 6209-2Z/C3 6212-2Z/C3 6209-2Z/C3 6213-2Z/C3 6210-2Z/C3 6215-2Z/C3 6212-2Z/C3

Max Cu-area mm 2 Terminal box Screws Fan Fan cover Material Material Paint colour shade Surface treatment Stator winding Material Impregnation Insulation class Stator winding temperature sensors Rotor winding Balancing method Key ways Heating elements Enclosure Cooling method Drain holes Lifting lugs On request Material

35 M6

Code S: 70

70 M10

6 terminals for connection with cable lugs (not included) Polypropylene. Reinforced with 20% glass fibre. Hot dip galvanized steel Black, NCS 8801-B09G Polyester powder paint, ≥ 100?m Copper. Polyester varnish. Insulation class F. Temperature rise class B, unless otherwise stated. Optional. Diecast aluminum. Half key balancing. Closed keyway 25 W IP 55. IC 411. Drain holes with closable plastic plugs, open on delivery. Integrated with the stator (round motor bolted) 50 W

ABB LV Motors | LV General performance motors EN 02-2010 17

ABB Motors’ total product offer

ABB offers several comprehensive ranges of AC motors and generators. We manufacture synchronous motors for even the most demanding applications, and a full range of low and high voltage induction motors. Our in-depth knowledge of virtually every type of industrial processing ensures we always specify the best solution for your needs.

Low voltage motors and generators Process performance motors for more demanding applications – Cast iron motors – Premium efficiency motors – NEMA motors Industrial performance motors – flexibility for most customer applications – Aluminum motors – Steel motors – Cast iron motors General performance motors – out-of-the-box simplicity for high volume customers – Aluminum motors – Cast iron motors Motors for hazardous areas – Flameproof motors – Increased safety motors – Non-sparking motors – Dust ignition proof motors Marine motors – Aluminum motors – Steel motors – Cast iron motors – Open drip proof motors

Motors for additional applications – Open drip proof motors – Brake motors – Single phase motors – High ambient motors – Permanent magnet motors – High speed motors – Wind turbine generators – Smoke venting motors – Water cooled motors – Motors for roller table drives – Servomotors High voltage and synchronous motors and generators – High voltage cast iron motors – Induction modular motors – Slip ring motors – Motors for hazardous areas – Synchronous motors and generators – DC motors and generators – Wind turbine generators – Traction motors

18 LV General performance motors EN 02-2010 | ABB LV Motors

Visit our web site www.abb.com/motors&generators
Motors & Generators > Motors >> Low Voltage Motors Process performance motors Industrial performande motors >>> General performance motors >>>> Aluminum motors >>>> Cast iron motors Motors for hazardous areas Marine motors Motors for additional applications

ABB LV Motors | LV General performance motors EN 02-2010 19

Contact us

9AKK1045592 EN 02-2010 Waasa Graphics Oy

www.abb.com/motors&generators

? Copyright 2010 ABB. All rights reserved. Specifications subject to change without notice.


相关文档

ABB Low Voltage Products
ABB Low-voltage drives
ABB low voltage wind turbine converters样本
No.1 Low Voltage selectivity with ABB circuit-breakers
abb lng brochure_chinese_low
ABB_produktuebersicht_E_low
low voltage
Low Voltage Circuit Design
Miniaturized Low-Voltage Power Converters
2014-35-EU_Low voltage directive
电脑版